Instrutech CDM900 Micro Bee User Manual page 2

Instruction Manual
Important User Information
electromechanical equipment. Because of these differences, and because there are a variety of uses for solid state equipment, all
persons that apply this equipment must take every precaution and satisfy themselves that the intended application of this equipment is
safe and used in an acceptable manner.
In no event will InstruTech be responsible or liable for indirect or consequential damages that result from the use or application of this
equipment.
Any examples or diagrams included in this manual are provided solely for illustrative purposes. Because of the many variables and
requirements imposed on any particular installation, InstruTech cannot assume responsibility or liability for any actual use based on the
examples and diagrams.
No patent liability is assumed by InstruTech with respect to use of information circuits, equipment, or software described in this manual.
Throughout this manual we use notes, notices and apply internationally recognized symbols and safety messages to make you aware of
safety considerations.
Identifies information about practices or circumstances that can cause electrical or physical hazards which, if precautions are not taken,
could result in death or serious injury, property damage, or economic loss.
CAUTION
WARNING
Ccc
Identifies information about practices or circumstances that can cause electrical or physical hazards which, if precautions are not taken,
WARNING
could result in minor or moderate injury, property damage, or economic loss.
NOTICE
Identifies information that is critical for successful application and understanding of the product.
SHOCK HAZARD
WARNING
Ccc
Labels may be located on or inside the device to alert people that dangerous voltages may be present.
WARNING
InstruTech
There are operational characteristic differences between solid state equipment and
CDM900 Micro Bee
Page 1