Related Manuals for Creative Play VERTICAL-Slatted Bench
Summary of Contents for Creative Play VERTICAL-Slatted Bench
- Page 1 VERTICAL - Slatted Bench Assembly Instructions HORIZONTAL VERSION IMPORTANT - If foundation are required support legs will be have been extended 450mm REF: CP054 /SBV - VERTICAL SLATTED BENCH pg 1 of 7...
- Page 2 PARTS required (Standard 90x90 L’s) BENCH SLATS - QTY 14 (147mm x 47mm) SLAT SUPPORTS - QTY 2 (90mm x 90mm) (80mm brass screws) SUPPORTS - QTY 4 (40mm brass screws) (90mm x 90mm) *IMPORTANT - if foundations required additional 450mm included If freestanding use angle cleats and expansion bolts/excalibur bolts to secure seats onto tarmac OPTIONAL - If installed onto tarmac/concrete...
- Page 3 TOOLS required pg 3 of 7 REF: CP054 /SBV - VERTICAL SLATTED BENCH...
- Page 4 Foundation Details SOIL TIMBER SUPPORT POST CONCRETE pg 4 of 7 REF: CP054 /SBV - VERTICAL SLATTED BENCH...
- Page 5 Assembly Instructions If the bench IS pre-assembled JUMP TO STEP Attach T2 & T3 timber to 90x90 L’s Using 40mm brass screws pg 5 of 7 REF: CP054 /SBV - VERTICAL SLATTED BENCH...
- Page 6 Assembly Instructions Repeat for the other second set of T2 & T3 timbers Attach the T1 timbers to the T2 timbers (slat supports) Using 120mm brass screws Use 3 screws per SLAT (left/middle/right) ensure they are uniform Attach the 2 centre slats first - they sit 2.5mm either side of the centre (makes the 5mm gap) *5mm gap between the T1 timbers pg 6 of 7...
- Page 7 Assembly Instructions Ensure slats are spaced / arranged as shown View from below shown *5mm gap between the T1 timbers Install the ASSEMBLED BENCH Using ANGLE CLEATS with 40mm brass screws and EXPANSION BOLTS or CONCRETE INTO GROUND as per foundation drawings Position angle cleats on the INSIDE of Follow the FOUNDATION DETAILS on each SUPPORT...
Need help?
Do you have a question about the VERTICAL-Slatted Bench and is the answer not in the manual?
Questions and answers