Subscribe to Our Youtube Channel
Related Manuals for Creative Play HS113
Summary of Contents for Creative Play HS113
- Page 1 HS113 - OCTAVIA HALF (6M) Installation Instructions REF: HS113 pg 1 of 18 01.08.2019...
-
Page 2: Parts Required
SEAT SUPPORT x 7 SSA-I (INNER) SEAT SUPPORT x 2 SSA-E (END) SEATING & SIDES PARTS / ASSEMBLIES UPRIGHT MAIN TIMBER UMT - QTY x5 UPRIGHT ADDITIONAL UAT - QTY x7 UPRIGHT TIMBERS REF: HS113 pg 2 of 18 01.08.2019... - Page 3 FS - a - QTY X 2 FS - b - QTY X 2 FS - c - QTY X 2 FLOOR PARTS / ASSEMBLIES x314 97.M8X80CSK x624 97.D4.5X60 (DECK SCREW) 97.M8X120CSK 97.M8X180CSK REF: HS113 pg 3 of 18 01.08.2019...
- Page 4 RA - QTY X 4 ROOF MAIN SUPPORTS RM - QTY X 5 ROOF SUPPORTS RS - a - QTY X 4 RS - b - QTY X 1 ROOF BRACES RB - QTY X 5 REF: HS113 pg 4 of 18 01.08.2019...
-
Page 5: Foundation Details
FOUNDATION DETAILS NOTES: POST HOLES 400MM x 400MM REF: HS113 pg 5 of 18 01.08.2019... - Page 6 FSA - cl FSA - ar FSA - cr ATTACH FSA - d TIMBER TO REINFORCE FSA TIMBERS SHOWN USING 4X M8X180MM WOOD SCREWS, ENSURE SCREWS ARE INSERTED FROM INSIDE FRAMEWORK FSA - d REF: HS113 pg 6 of 18 01.08.2019...
- Page 7 INSTALLATION INSTRUCTIONS INSTALL THE UMT TIMBERS THE 90X90 TIMBER ON THE FSA ASSEMBLIES HELP POSITION THESE SCREW THE FAS ASSMBLIES TO THE UMT TIMBERS USING - 97.M8X120CSK - QUANTITY X 20 REF: HS113 pg 7 of 18 01.08.2019...
- Page 8 NOTES: TOP FACE OF TIMBER WILL BE FLUSH WITH THE TOP OF THE ‘INNER’ 90X90 TIMBER INSTALL FA - a ASSEMBLIES USING - 97.M8X180CSK - QUANTITY X 32, ENSURE SCREWS DO NOT CLASH REF: HS113 pg 8 of 18 01.08.2019...
- Page 9 FS - a FS - b FS - c FS - a FS - b FS - c ATTACH ADDITIONAL SUPPORTS (UAT) USING 2 X M8X180MM PER TIMBER - SCREWING INTO THE FA ASSEMBLY REF: HS113 pg 9 of 18 01.08.2019...
-
Page 10: Installation Instructions
USING 2 X M8X120MM & 2 X M8X180MM WOOD SCREWS NOTES: ENSURE SCREWS ARE AS SHOWN TO RIGHT, TAKE CARE NOT TO SPLIT UPRIGHT TIMBER 2X 120MM PER TIMBER 2X 180MM SCREWS PER END REF: HS113 pg 10 of 18 01.08.2019... - Page 11 USING 120MM SCREWS INTO THE KING POST AND 180 SCREWS INTO THE UPRIGHT TIMBERS ATTACH THE RA-L / RA-R ASSEMBLIES TO THE RM TIMBERS USING - 97.M8X80CSK - QUANTITY X 8 (INTO EACH RM TIMBER EITHER SIDE) RA-L RA-R REF: HS113 pg 11 of 18 01.08.2019...
- Page 12 USING - 97.M8X80CSK - QUANTITY X 12 MIDDLE SECTION NOTES: REPEAT STEPS 12 & 13 UNTIL ALL RA PARTS HAVE BEEN ATTACHED ATTACH RS - b TIMBER TO FRONT RM TIMBERS SHOWN USING 4 M8X180MM WOOD SCREWS REF: HS113 pg 12 of 18 01.08.2019...
- Page 13 USING 20 X M8X80MM WOOD SCREWS RT3 - a NOTES: ENSURE RT5 TIMBER IS PLACED OVER RT4 TIMBER AND SCREWED TOGETHER AS SHOWN TOP OF RT35 TRIM SHOULD BE FLUSH WITH TOP OF TR3 TRIM SLATS ALREADY INSTALLED REF: HS113 pg 13 of 18 01.08.2019...
- Page 14 INSTALLATION INSTRUCTIONS ATTACH THE RT1 TRIM PIECE USING 4 X M8X80MM WOOD SCREWS FOR EACH TIMBER ATTACH ROOF BRACES - RB USING - 97.M8X120CSK - QUANTITY X 4 PER TIMBER REF: HS113 pg 14 of 18 01.08.2019...
- Page 15 LENGTH SLAT CENTRALLY THEN ADD 3-4 VERTICAL TIM- BERS TO COVER THE GAP NOTES: USE 2 X DECK SCREWS FOR WHERE DECK IS SCREWED INTO FLOOR SUPPORTS - GENERALLY 24 X DECK SCREWS PER SLAT / TIMBER REF: HS113 pg 15 of 18 01.08.2019...
- Page 16 THE UPRIGHT TIMBER - FIG 3 (THIS WILL NOT BE POS- SIBLE FOR THE CENTRAL SEAT SUPPORTS) FURTHER SECURE USING 2 X M8X120MM WOOD SCREWS, POSITION THESE SCREWS ON THE ‘INSIDE’ AND SCREW INTO THE GROOVE - FIG 4 FIG 3 FIG 4 REF: HS113 pg 16 of 18 01.08.2019...
- Page 17 SS-Ia SS-Ia SS-Eb SS-Eb SS-Ea SS-Ea FURTHER SUPPORT THE ROOF USING RB-T TIMBERS USING - 97.M8X80CSK - QUANTITY X 4 PER ‘WEDGE’ NOTES: RB-T TIMBER BLOCKS SECURES / SUPPORT THE ADJOINING ROOF ASSEMBLIES REF: HS113 pg 17 of 18 01.08.2019...
-
Page 18: Installation Complete
INSTALLATION INSTRUCTIONS INSTALLATION COMPLETE PLEASE CHECK ALL SCREWS COUNTERSUNK / NEAT SAND ANY TIMBERS AS REQUIRED REF: HS113 pg 18 of 18 01.08.2019...
Need help?
Do you have a question about the HS113 and is the answer not in the manual?
Questions and answers