Subscribe to Our Youtube Channel
Related Manuals for Creative Play CP050
Summary of Contents for Creative Play CP050
- Page 1 PARK BENCH - DOUBLE LENGTH Assembly Instructions DOUBLE SIDED VERSION STANDARD IMPORTANT - If foundation are required support legs will be have been extended 450mm REF: CP050 /PBL - PARK BENCH DOUBLE LENGTH pg 1 of 8...
- Page 2 *IMPORTANT - if foundations required additional 450mm included If freestanding use angle cleats and expansion bolts/excalibur bolts to secure seats onto tarmac BENCH SUPPORT (FRONT) - QTY 3 (90mm x 90mm) pg 2 of 8 REF: CP050/PBL - PARK BENCH DOUBLE LENGTH...
- Page 3 NOT REQUIRED IF SUPPORT POSTS HAVE BEEN EXENDED FOR FOUNDATIONS (angle cleats/brackets) (40mm brass screws) expansion bolts / excalibur bolts To be used to secrure seats onto tarmac TOOLS required pg 3 of 8 REF: CP050/PBL - PARK BENCH DOUBLE LENGTH...
- Page 4 Foundation Details SOIL TIMBER SUPPORT POST CONCRETE pg 4 of 8 REF: CP050/PBL - PARK BENCH DOUBLE LENGTH...
- Page 5 Using 180mm brass screws *Ensure screws are as shown below Measurement shown is from finsihed ground level - if legs are extended to allow concrete foundations ADD 450mm (TOTAL 763mm) pg 5 of 8 REF: CP050/PBL - PARK BENCH DOUBLE LENGTH...
- Page 6 Using 120mm brass screws Use 8 screws per SLAT (2 for each T7 timber) ensure they are uniform Face of T2 and T6 timber FLUSH/LEVEL *5mm gap between the T1 timbers pg 6 of 8 REF: CP050/PBL - PARK BENCH DOUBLE LENGTH...
- Page 7 Assembly Instructions Attach the T4 (arm rests) Using 120mm brass screws & 80mm brass screws 2 x 120mm brass screws 2 x 80mm brass screws *Ensure screws are as shown pg 7 of 8 REF: CP050/PBL - PARK BENCH DOUBLE LENGTH...
- Page 8 - Use 40mm brass screws to attach angle cleat to the support legs - Use expansion bolts or EXCALIBUR bolts to secure the bolts to the concrete / tarmac pg 8 of 8 REF: CP050/PBL - PARK BENCH DOUBLE LENGTH...
Need help?
Do you have a question about the CP050 and is the answer not in the manual?
Questions and answers