Power Connection; Figure 4: Front Side Of External Switchbox - UniTemp RSS Series Operation Instructions Manual

The reflow solder system RSS-110-S is designed as table top machine and therefore
has got very compact dimensions:
 Width:
 Depth:
 Height:
 Weight:
A stable laboratory table (working height approximately 70 cm) with a minimum floor
space of 40 cm x 60 cm (W x D) is recommended. For service purposes it is required to
have rear side accessible to disconnect peripherals from or connect peripherals to RSS-
110-S reflow solder system.
Both the recirculating chiller WC I (available as option) or the optionally available vacu-
um pump can be placed in another room (noise emission). They can be remotely con-
trolled by the RSS-110-S reflow solder system however you have to take care that both
units are switched on before switching on the reflow solder system.

2.1 Power connection

2.1.1 Power supply of reflow solder system
The reflow solder system RSS-110-S is operated with 230 V, 50 Hz. For connection to a
power socket with 10A maximum current (circuit breaker with slow characteristic) the
provided 230V power supply cable with blue Neutrik connector (2 m length) has to be
used (see no. 12 in Figure 3).
2.1.2 Power supply of chiller and vacuum pump
The reflow solder system RSS-110-S provides 230V electric output for the vacuum
pump (see no. 13 in Figure 3) and 24V switching output for chiller (see no. 15 in Figure
3).
A chiller type WC I ordered through UniTemp is already equipped with an internal
switchbox (24V switching relay). Any other chiller model can be operated on the RSS-
110-S reflow solder system by using an external switchbox (option RSS-SW).
The external switchbox should be placed
near to the chiller. The remote cable (24V)
features a length of 2 m and has to be
connected to both the remote outlet
connector of reflow solder system (see no. 15
in Figure 3) and the remote inlet connector of
external switchbox (see no. 16 in Figure 5).
UniTemp GmbH • Luitpoldstr. 6 • D-85276 Pfaffenhofen • +49 (0) 8441 787663 • www.unitemp.de • info@unitemp.de
Operation Instructions RSS-110-S En Ver. 06.2016
274 mm
517 mm
215 mm
14 kg

Figure 4: Front side of external switchbox

Page 8 of 13