UniTemp RSS Series Operation Instructions Manual page 4

Programmable inert gas vacuum plate, reflow solder system
Table of Contents

Advertisement

ATTENTION: A risk of fire and electrical shock exists in all electrical appliances
and may cause personal injury or death. Please follow all safety instructions.
 Please take time to thoroughly read this manual. It has been provided to help you
to obtain maximum satisfaction and enjoyment with your new appliance by illus-
trating how to use it safely and efficiently.
 Make sure that system is turned OFF and connect it to outlet 230 V, 50 Hz.
 To reduce the risk of electrical shock, do not place any part of the system in or
under water as well as other liquid. See also instructions for cleaning.
 Unplug from outlet when not in use and before cleaning. Always turn system OFF
before unplugging. Allow to cool before cleaning the appliance.
 Do not operate any damaged appliance. Do not operate with a damaged cord or
plug. Do not open the system. Repairs must be executed by authorized electri-
cian only, or send the system to UniTemp facility for examination, repair, electri-
cal or mechanical adjustment.
 The surface of the hot plate may remain extremely hot, even long time after dis-
connecting. Do not touch hot surfaces. Use handles or tweezers.
 Do not put any items or flammable materials (e.g. paper, cardboard, plastic, etc.)
on the hot plate.
 Do not let cord hang down over edge of table or counter or hot surfaces.
 Do not suspend water cooling as long as the surface of the plate is hot.
Warning: no pieces may drop into the system between hot plate and cham-
ber because cooling down process can be disturbed permanently and the
hot plate can be damaged.
The figures shown in this manual are only examples for your understanding. Labels and
names on your device can differ hereof. As well the indicated values on the PC display
by using the UniSoft software can differ from the values shown in the figures. The val-
ues from this manual may not be transferred to the corresponding arrays of the soft-
ware!
UniTemp GmbH • Luitpoldstr. 6 • D-85276 Pfaffenhofen • +49 (0) 8441 787663 • www.unitemp.de • info@unitemp.de
Operation Instructions RSS-110-S En Ver. 06.2016
Page 4 of 13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rss-110-sRss-110-s/us

Table of Contents