Unpacking And Installation Of Rss-110-S System; Figure 1: Front View Of Reflow Solder System - UniTemp RSS Series Operation Instructions Manual

2 Unpacking and installation of RSS-110-S system

Please unpack each part carefully!
Scope of delivery (depending on ordered options):
 Operation Instructions for reflow solder system RSS-110-S
 Operation Instructions for software SPS_Soft
 Corrugated pipe, seal rings and quick spanner (in case of ordering a vacuum
pump)
 Power supply cable 230 V with blue Neutrik connector (2 m length)
 Power supply cable 230 V for vacuum pump with white Neutrik connector (2 m
length)
 Remote cable 24 V for recirculating water chiller (2 m length)
 USB 2.0 memory stick
 Blue PU tube for process gases (outer diameter 4 mm, 4 x 2.5 x 0.75)
 Blue PU tube for cooling water (outer diameter 8 mm (8 x 6 x 1) for inlet, outer di-
ameter 10 mm (10 x 7.5 x 1.25) for outlet connector)

Front view of reflow solder system
1: Locking bar
2: Hinged cover
3: Viewport
4: Heating plate
5: Touch panel
6: USB 2.0 socket
UniTemp GmbH • Luitpoldstr. 6 • D-85276 Pfaffenhofen • +49 (0) 8441 787663 • www.unitemp.de • info@unitemp.de
Operation Instructions RSS-110-S En Ver. 06.2016

Figure 1: Front view of reflow solder system

Page 6 of 13