Safety Precautions - Illuco IDS-1100 Instruction Manual

03 IDS-1100 Dermatoscope

Safety Precautions

Before using the IDS-1100 for the first time, read the manual completely. The manufacturer and
distributors are not liable for mechanical troubles, property damage or personal injury caused by user(s)
unfamiliarity with instructions of the manual.
The IDS-1100 is designed for external examination only.
Do not look directly at LED light.
Patients must close their eyes during facial examinations.
Handle softly and do not put too much pressure when adjusting focus dial.
The IDS-1100 is a magnetic embedded device. Do not use the IDS-1100 near magnetic susceptible
devices.
Vapors can form on the lens if you suddenly heat in a cold room. In this case, do not use the device
until vapors are naturally eliminated.
It has a Lithium-ion battery embedded. Handle it carefully to prevent damage from an external shock.
Also do not use and store it in abnormally hot or cold climates.
The device may malfunction due to electromagnetic waves caused by portable personal telephones,
transceivers, radio-controlled toys and etc. Be sure to avoid having objects such as, which affect the
device, brought near the device.
The device generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to other devices in the vicinity.
However, there is no guarantee that interference will not occur in a particular installation.
equipment does cause harmful interference to other devices, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
1.
2.
Reorient or relocate the device
Increase the separation between devices
If this