Warranty - Illuco IDS-1100 Instruction Manual

11
IDS-1100 Dermatoscope
problem.
2 Charging not working
-Change the charging cable.
If the problem persists, replace the battery with a new one.
When the both tries ended up with failure, contact the ILLUCO A/S center or your local distributor and report the
problem.
3 Single LED does not light up
-The LEDs embedded on IDS-1100 are designed to last over 100,000 hours. If any of the LEDs fails, there can be
cracks on soldering. Such case, contact the ILLUCO A/S center or your local distributor and report the problem.
4 Mechanical malfunction
If there are issues with functional buttons are/or focusing wheel, please contact the ILLUCO A/S center or your local
distributor. IDS-1100 is designed to prevent disassembling by an unskilled person. If you attempt to disassemble it,
there is a high probability of breakage on connections and joints.

Warranty

ILLUCO Corporation Ltd. Hereby warrants that new IDS-Series purchased directly from ILLUCO Corporation Ltd.,
headquartered in Gunpo, South Korea, will be free from factory defects in material and workmanship for the period
of time stated below, subject to certain limitations.
OUR WARRANTY POLICY
This warranty is not transferable and covers replacement parts only. This warranty does not cover any consequential
damages or business loss.
THE PERIOD OF WARRANTY
The warranty on your IDS-Series is seven (7) years from the date of purchase by the original owner against defects
in material and workmanship.
GENERAL EXCLUSIONS
General exclusions from this warranty shall include any failures caused by: