Summary of Contents for fantastic furniture Giselle
Page 1
Version 1.0 Giselle Day Bed fantasticfurniture.com.au...
Page 2
We’re thrilled you’ve chosen Fantastic Furniture to help create a home you’ll love! Love it? Share it! Fantastic buy! Share how it looks at home on Instagram for your chance to win a $250 Fantastic Furniture Gift Card! @fantasticfurniture fantasticfurniture.com.au Page 2...
Assembly checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Unless instructed, do not fully tighten screws Identify and lay out all of the components until the item is fully assembled. before you begin assembly.
Page 4
What you need to assemble the product 1 x Right Panel (P3) 1 x Back Panel (P1) 1x Cross Bar(P5) 2 x Side Rails (P4) 1 x Left Panel (P2) Part List: Box 1: Back Panel (P1); Left Panel (P2); Right Panel(P3);...
Page 5
Step 1 (P2) (P3) You will need 4 x Short Bolts (H1) 1 x Allen Key (H3) (H1) Insert 4 x short bolts (H1) into the bottom holes of the left panel (P2) and right panel (P3) using the allen key (H3). Do not fully tighten the bolts and leave a gap of 5mm as shown. Step 2 (H3) (H4)
Page 6
Step 3 (P3) (P1) You will need 4 x Long Bolts (H2) 1 x Allen Key (H3) (P2) (H2) Attach the back panel (P1) to the left and right panel (P2 & P3 ) with 4 x long bolts (H2) using an allen key (H3).
Step 5 Lower the slat (P7) with the end caps (P6) to the side rails (P4). Ensure the plastic caps are in place over the side rail holes and apply downward pressure until the plastic caps are fully inserted into the rails. Repeat for every bed slat until finished. Step 6 IMPORTANT: Fully tighten all bolts on bed.