Important - Configure Before Use; Obtain Mmsi (Maritime Mobile Service Identity) Number - Raymarine AIS700 Installation Instructions Manual

5.1 IMPORTANT — Configure before use
Before first use this product must be correctly configured using a personal computer and the ProAIS2
software, which can be downloaded from the Raymarine website:
• Failure to configure the product will prevent correct operation.
• Configuration MUST include programming the product with an MMSI number. In some regions
(such as the United States), the MMSI must be programmed by a qualified dealer or installer.
• Incorrect / incomplete configuration can cause erroneous data and prevent your product from
transmitting.
• If an MMSI number is not programmed the product will operate as an AIS receiver only and will
not transmit AIS information for your vessel.

5.2 Obtain MMSI (Maritime Mobile Service Identity) number

Before commencing installation ensure you have obtained an MMSI number for your vessel. This is
a mandatory requirement.
An MMSI is a 9 digit number which is sent over a radio frequency channel in order to identify the
originating vessel / station. If your vessel already has an MMSI number (used for a VHF DSC radio, for
example), then the same MMSI number must be used to program your product.
Note:
If an MMSI number is not entered, your product can only be used in Silent Mode and will operate
as a receiver only.
In the United States of America (USA), the MMSI and Static Data must be entered only by a
Raymarine® dealer or other appropriately qualified installer of marine communications equipment for
marine vessels.
In the USA, the user is NOT authorized to do this.
In some areas, a radio operator licence is required before an MMSI number will be issued. You can
request an MMSI number from the same agency that issues radio or Ship Radio licences in your area.
In Europe and other parts of the world outside of the United States of America, the MMSI and Static
data can be set up by the user.
For further details, refer to the relevant Telecommunications Regulatory Body for your area.
Refer to 5.3 MMSI Regulatory bodies and application submissions
for a list of contacts for obtaining MMSI numbers for certain areas.
Warning: MMSI entry
You can only enter a MMSI number once, if you enter the number incorrectly or
need to change your MMSI number, the unit will require re-programming by an
authorized Raymarine dealer.
38
www.raymarine.com/software