Software Upgrade Instructions - Acer TravelMate 220 Series Manual

Setting
Menu Item
Photo Display Ratio
Slideshow Duration

Software Upgrade Instructions

There are 2 ways to do this:

Via USB flash drive
(1) Download new firmware by one compressed file from acer global
website.
(2) Copy the uncompressed file in USB flash drive and plug in projector.
<Note: file name is by Model Name_USB_6 digits.bin (Ex:
X1525C_USB_000000.bin)
(3) Press "MENU" to open the OSD menu.
(4) Go to "Setting" > "Firmware Upgrade" Select "USB Drive" and press
Enter to start.

Via Network
(1) Connect a Acer WirelessPrejection-Kit dongle (optional) or a RJ45
cable to the projector.
(Make sure it connects to the internet.)
(2) Press "MENU" to open the OSD menu.
(3) Go to "Setting" > "Firmware Upgrade" Select "Network" and press
Enter to start.
NOTE 1: Do not turn off projector while the firmware upgrade is
processing.
NOTE 2: When upgrading the firmware, remove all cables and
other USB devices.
NOTE 3: External USB HDD is probably not supported if
connection lacks of USB power (recommend to use Y-cable) since
USB power is not enough.
NOTE 4: The disk with partition is not supported.
Options
Original, Full Screen
3 sec, 5 sec, 10 sec
11