Noise Information - Wickes PDH32DS.2 Manual

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K & K
pA wA
Wear ear protection when sound pressure is over:
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN60745:
Hammer drilling into concrete
Chiseling
The declared vibration total value may be used for comparing one tool with another, and may also be used in a
preliminary assessment of exposure.
WARNING! The vibration emission value during actual use of the power tool can differ from the declared value
depending on the ways in which the tool is used dependant on the following examples and other variations on
how the tool is used:
How the tool is used and the materials being drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING! To be accurate, an estimation of exposure level in the actual conditions of use should also take
account of all parts of the operating cycle such as the times when the tool is switched off and when it is running
idle but not actually doing the job. This may significantly reduce the exposure level over the total working period, helping
to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills.
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Plan your work schedule to spread any high vibration tool use across a number of days.
Hammer drill into concrete a
Uncertainty K=1.5m/s
2
Chiselling a =17.879m/s
h,Cheq
Uncertainty K=1.5m/s
2
7
L
= 19.372m/s
2
h,HD
2
L : 96.4dB(A)
pA
: 107.4dB(A)
wA
3.0dB(A)
80dB(A)