Table of Contents
Advertisement
Quick Links
PRO III
M u l t i p l e F l a s h C a r d Re a d e r
User's Manual
Windows 98, Windows 98SE or Windows 2000 users
Please perform software setup first before proceeding
to hardware setup.
AtechFlash Technology, Inc.
www.atechflash.com
Congratulations on the purchase of your new AtechFlash
Technology PRO III flash reader/writer. PRO III is a
read/write device that supports multiple formats of flash
memory cards and we recommend that you read this manual
carefully to become familiar with the operation of the
product. This manual explains the features and
specifications of your new PRO III reader, as well as the
installation in a few simple steps. Please retain this guide for
future reference.
If you have questions regarding your PRO III reader, please
call our technical support hotline at toll free number (US
only)
1-866-85-ATECH (1-866-852-8324)
or email us at
techsupport@atechflash.com
or visit our website at
www.atechflash.com
All trademarks, service marks, trade names and copyrights are
properties of their respective owners.
Table of Content
1. Introduction...........................................1
2. Key Features........................................2
3. System Requirement............................3
4. Cable Description.................................4-5
5. Before Installation.................................6
6. Software setup......................................7
7. Hardware setup....................................8-12
9. Specifications.......................................14
Advertisement
Table of Contents
Related Manuals for Atech Flash Technology PRO III
Summary of Contents for Atech Flash Technology PRO III
-
Page 1: Table Of Contents
This manual explains the features and specifications of your new PRO III reader, as well as the installation in a few simple steps. Please retain this guide for future reference. -
Page 2: Introduction
Windows ME Windows 2000* Windows XP * A CD ROM Drive is also required to access PRO III Setup CD when setting up PRO III on Windows 98 / 98SE / 2000 For External Setup IBM PC compatible computer with USB port (USB 1.1 or USB 2.0) -
Page 3: Cable Description
IEEE 1394 port of the reader.(For internal setup only). Note: IEEE 1394 feature on PRO III reader is an IEEE 1394 port extension only. Using IEEE 1394 cable will not increase flash media card read and write performance. -
Page 4: Software Setup
(6) Once computer is restarted, you can proceed to Hardware Setup. <<<To Remove PRO III Driver from your computer>>> In case if you want to remove PRO III setup driver from your computer, please follow the steps below : (1) Go to [My Computer] [Control Panel] [Add/Remove Programs] and select "USB Mass Storage Reader", then... - Page 5 Hardware Setup Continued Depending on the pin layout on your motherboard USB header, it may be necessary rearrange the color wires of Internal USB cable to match the USB pin assignment. Please refer to your motherboard manual for USB header pin assignment information.
-
Page 6: Using Pro Iii Multiple Card Reader
Smartmedia Card Secure Digital Multimedia Card Using PRO III Multiple Card Reader is very similar to using a floppy drive. Simply insert your flash media card into the slot and click on the appropriate Removable Disk icon in My Computer, it will allow you to access your flash media card like a disk.
Need help?
Do you have a question about the PRO III and is the answer not in the manual?
Questions and answers