Summary of Contents for Atech Flash Technology XM-28U
Page 1
Atech Flash Technology, Inc. XM-28U User's Guide...
Page 2
This guide will explain the features and specifications of your new media reader, as well as the installation in a few simple steps. Please retain this guide for further reference. Convenient features like fully Plug-and-Play make it easy to setup XM-28U in your kiosk or computer system.
XM-28U Internal USB 2.0 Cable - Connects XM-28U to USB pin headers on motherboard. External USB 2.0 Cable - Connects from XM-28U unit to any available USB port in Computer. **If you want to use the Front USB option, you will need an addtional USB cable**...
Page 4
Windows 98SE or Windows 2000 users: Driver installation is required. Please perform software setup first before using the XM-28U. This is an USB 2.0 device and it is backward compatible with USB 1.1 interface. However, USB 1.1 performance can only be expected when connected to a USB 1.1.
Page 5
AFT Custom Drivers Read only Drivers are available so that all media cards that are inserted are Read Only for security purposes. AFT Custom Icons (for Windows XP/ME/2000/98SE) AFT Custom Icons, are available. An example: Insert Memory Card and click on the Icon that matches your memory card.
Page 6
Using XM-28U Using XM-28U is similar to using a floppy drive. Simply insert your media card into the slot and click on the appropriate Removable Disk icon in My Computer, it will allow you to access your media card like a disk.
Specifications 4.02 inch x 1 inch x 4.92 inch / 102 mm x 25 mm x 125 mm Dimension (W x H x D): 5V DC, 500mA (USB bus power) Power Requirement: Memory Stick PRO, Memory Stick PRO Duo, Memory Stick PRO MG Supported media format: Memory Stick, Memory Stick Duo MG, Memory Stick Select, Memory Stick Duo Magicgate Memory Stick*, Magicgate Memory Stick Duo, Memory Stick Rom...
Need help?
Do you have a question about the XM-28U and is the answer not in the manual?
Questions and answers