Advertisement
P R O II
USB MULTI-SLOT CARD READER/WRITER
User's Manual
AtechFlash Technology, Inc.
www.atechflash.com
Congratulations on the purchase of your new
AtechFlash Technology PRO II flash reader/
writer. PRO II is a read / write device that
supports multiple types of flash memory cards
and we recommend you read this manual
carefully to become familiar with the operation
of the product.
This manual explains the features of your new
PRO II reader, the specifications and the
installation in a few simple steps.
Please retain this guide for further reference.
If you have questions regarding your PRO II
reader / writer, please call our technical support
hotline at toll free number
1-866-85-ATECH (1-866-852-8324)
or e-mail us at
techsupport@atechflash.com
or visit our web site at
www.atechflash.com
Advertisement
Table of Contents
Related Manuals for Atech Flash Technology PRO II
Summary of Contents for Atech Flash Technology PRO II
- Page 1 Congratulations on the purchase of your new AtechFlash Technology PRO II flash reader/ writer. PRO II is a read / write device that supports multiple types of flash memory cards and we recommend you read this manual carefully to become familiar with the operation of the product.
-
Page 2: Table Of Contents
Package Content 1x PRO II Flash reader / writer unit 1x External USB cable (External USB port to PRO II USB) 1x External DC-USB cable (External USB to PRO II DC Input) 1x Internal USB cable (Motherboard USB header to PRO II USB) 1x Internal Power Supply "Y"... -
Page 3: Features
Hardware Setup Using PRO II externally Hardware setup is easy. Simply plug in the External USB cable and USB to DC cable, your new PRO II reader/writer is ready to operate. Please refer to the following diagram for detail. External... - Page 4 Using PRO II internally Like mounting a 3.5" floppy drive to your PC, PRO II comes with 3 screw holes on each side for position adjustment. Insert PRO II into one of empty 3.5" external drive bay of your PC, align the PRO II front panel evenly with the computer front bezel and apply screws to secure it into the place.
-
Page 5: Software Setup
The diagram below shall give you an idea of how it is done. Software Setup Windows ME and Windows XP or later Software Setup for PRO II under operating systems, like Windows ME and Windows XP, is very simple . No software driver is required. Here are the few steps: 1. - Page 6 Select “Yes, I want to restart my computer now” and click on “OK” Computer will restart and you can connect the cables from PRO II reader/writer to your computer (as described in Hardware Setup) after restart. Your computer shall recognize the Pro II unit...
- Page 7 PRO II reader/writer slot. To remove Flash media cards from PRO II reader/writer 1. Double click on the “Removable Device” icon on the lower right hand corner of your desktop.
Need help?
Do you have a question about the PRO II and is the answer not in the manual?
Questions and answers