Advertisement
Agile S and Agile S NI series
FAQ: PXE boot
5.
PXE – BIOS setup
1.
Connect external keyboard to the Agile X IS via docking station.
2.
Start or restart the device and enter BIOS.
Press "DEL"/"ENTF" key in start screen with BARTEC logo.
3.
Check that BIOS version is v1.29 or later.
(picture shows example for BIOS version v1.29)
4.
Go to "Boot" and select "Network Stack".
Subject to technical changes.
10/2020
Set "Network Stack" to "Enable"
Default setting is Default
FAQ
6/9
Advertisement
