Download Print this page

Toshiba RZE-BT1050E Instruction Manual page 2

Advertisement

Battery level indicators:
 : Charging 0% - 25%
 : Charging 25% - 50%
 : Charging 50% - 75%
 : Charging 75% - 100%
Power ON and OFF
Auto Power ON/OFF
1. The earbuds are turned on automatically when you take them out from the charging case. A
"Pairing" message is heard, and the left earbud status indicator
addition, attaching the earbuds to the charging case turns off the earbuds automatically.
2. The earbuds are turned off if no device is paired for more than 3 minutes.
Manually Power ON/OFF
Hold your finger to the touch sensor
power on. Once the earbuds are turned on, a "Power On" message is heard. Hold your finger
to the touch sensor
"Power Off" message is heard..
Note: Auto Power ON/OFF does not work when the charging case is not charged. When the
charging case is not charged, turn the power ON or OFF manually.
Using the Earbuds
Pairing
When using the earbuds for the first time, follow the procedure below to pair them.
1. The earbuds are turned on automatically when you take them out from the charging case.
2. Activate Bluetooth on your device and search for "RZE-BT1050E", select "REZ-1050E" to
complete pairing. Once connected, a "Connected" message is heard.
Playing music on a Bluetooth device:
Use the touch sensor
Play / Pause: Tap once on the right earbud
Volume Up : Tap 3 times quickly on the right earbud
Volume Down : Tap 3 times quickly on left earbud
Previous Song : Tap 2 times quickly on the left earbud
Next Song : Tap 2 times quickly on the right earbud
Activate Siri / Google Assistant : Tap once on the left earbud
(Note: Operations may vary depending on your smartphone)
Active Noise Cancellation Control:
1. Hold your finger on the touch sensor of the left or right earbud for 2 seconds to turn on the
noise cancellation.
2. To turn off the noise cancellation, hold your finger on the touch sensor
earbud for 2 seconds again.
 on the left and right earbuds
for 8 seconds to turn the power off. Once the earbuds are turned on, a
on the left or right earbud to perform the following operations:
flash in blue/red.
for 2 seconds to turn the
of the left or right
In

Advertisement

loading