Download Print this page

Toshiba RZE-BT700E User Manual

True wireless stereo sweat-resistant bluetooth 4.1 earphones built-in microphone.
Hide thumbs
   

Advertisement

RZE-BT700E Manual
How to pair for stereo mode:
1.When the L&R units are used independently:
They can be used as 2 complete and independent Bluetooth earbuds.
 Long press MFB for 3 seconds to turn on the earbud(blue indicator light quick
flash 3 times)
 After turning on, double-click MFB enter pairing mode(red&blue indicator lights
flash)
 Turn on your mobile phone's Bluetooth function and search for the name"T04" to
connect it.( indicator light off once connected)
 Long press MFB for 3 seconds until red indicator light quick flash 3 times to
power off the earbud
After the first use, just long press MFB until the blue indicator light flash, and the
earbud will re-connect with the mobile phone automatically.
2.When the L&R units are used together:
 Long press A&B earbud's MFB at same time for 3 seconds until blue indicator
flash
 A&B earbuds will connect automatically firstly, and then enter the pairing state.
 Blue lights off once A&B earbuds paired successfully
 Turn on your mobile phone's Bluetooth and search for the name"T04" to connect
it.( indicator lights off once connected)
 Long press A or B MFB for 3 seconds until red indicator light quick flash 3 times
to power off 2 earbuds
Note: If A&B earbuds doesn't pair successfully and can't listen to music, please
try steps as follow.
 Place the earbuds and mobile phone within 1 meter.
 Make sure 2 earbuds was turned off.
 Long press 2 earbud's MFB for 3 seconds at the same time to turn them on (blue
indicator light quick flash 3 times)

Advertisement

   Also See for Toshiba RZE-BT700E

   Related Manuals for Toshiba RZE-BT700E

   Summary of Contents for Toshiba RZE-BT700E

  • Page 1

    RZE-BT700E Manual How to pair for stereo mode: 1.When the L&R units are used independently: They can be used as 2 complete and independent Bluetooth earbuds.  Long press MFB for 3 seconds to turn on the earbud(blue indicator light quick flash 3 times) ...

  • Page 2

     Then double-click 2 earbud’s MFB enter pairing mode(red&blue indicator lights flash), 2 earbuds only blue lights flash in the later.  Waiting 2 earbuds pair successfully( 1 earbud blue indicator light flash, another earbud lights off)  If 2 earbud’s blue lights flash for a long time didn't pair successfully, double-click 2 earbud’s MFB enter pairing mode again(red&blue indicator lights flash),until pair successfully ...

  • Page 3: Product Specification

    The base charge the earbuds:  Putting earbuds into the charging case (please make the charging interface is correctly placed, and earbuds will indicates red light when the earbuds is being charged), the earbuds will automatically enter the charging state ...

  • Page 4

     Earbuds battery capacity:55mAh  Working range:10m  Working voltage:3.7V  Standby time:100H  Music playing time:≥2.5H (60% volume) Bluetooth certification: Bluetooth technology conform to the provisions of the state standards...

  • Page 5

    NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 6

    This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence.

Comments to this Manuals

Symbols: 0
Latest comments: