Advertisement
Quick Links
Instruction Manual
Model : RZE-BT1050E
Part Name
Charging case
(Front view)
Charging case
(Rear view)
Charging case
(Compartment)
3 Left
Earbuds
(Left and Right)
Getting Started
The earbuds and the charging case have built-in lithium-ion polymer batteries. Charge them fully
beforehand.
Charging the Earbuds
1. Place each earbud in the charging case in the right position and close the case. The charging
status indicator
indicator and will turn off after earbuds fully charged.
Charging the Charging Case
1. Insert the supplied USB cable into the Type-C USB charging socket
2. Connect the USB cable to a USB port of your computer or a mobile USB charger.
The charging status indicator
1
2
3 Right
4 5 5 4
is turn on, and the earbud status indicator is turn on in red.
flash during the charging
Charging status indicator for the case
Type-C USB charging socket
Charging port
Touch Sensor
Earbud status indicator
on the charging case.
Both
Advertisement
Related Manuals for Toshiba RZE-BT1050E
Summary of Contents for Toshiba RZE-BT1050E
- Page 1 Instruction Manual Model : RZE-BT1050E Part Name Charging status indicator for the case Charging case (Front view) Type-C USB charging socket Charging case (Rear view) Charging case Charging port (Compartment) 3 Left 3 Right Touch Sensor ...
- Page 2 When using the earbuds for the first time, follow the procedure below to pair them. 1. The earbuds are turned on automatically when you take them out from the charging case. 2. Activate Bluetooth on your device and search for “RZE-BT1050E”, select “REZ-1050E” to complete pairing. Once connected, a “Connected” message is heard.
- Page 3 Answering a call 1. To answer an incoming call, tap once on the touch sensor of the left or right earbud 2. To end the call, tap once on the touch sensor of the left or right earbud 3. To decline a call, hold your finger on the touch sensor of the left or right earbud for 2 seconds Specifications: Bluetooth Section Bluetooth Spec.