Advertisement
4
Disassemble BATTERY
1) Pull marked point.
2) DISASSEMBLE BATTERY.
Battery demolition be used only hand.
The disable tweezers, Driver, JIG
6
Check Battery flatness
5.3mm
1) Prepare the ruler or the card which can check
5.3mm thickness.
2) Place the Battery on the flat surface like the picture
( ※ Printed image should be top)
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.
Disassemble PBA
5
1) Check each part.
Check Battery flatness
6-1
OK
1) Check the battery flatness using the ruler or the card
2) In case of NG, battery should be replaced with
new one.
7-2
Level 2 Repair
NG
Advertisement
