Community Playthings 1 Classic Product Manual page 10

13
Use tall panels to create the second
layer, following the pat tern you have
chosen. Add connector rings as you go
so each panel is captured by four rings
and will not fall down. You may want to
stand on the platform to do this.
15
Screw a cap onto each post to lock
construction together. You will hear
a clicking sound as you turn the cap;
screw it all the way down.
10
14
Check all joints. Make sure all panels
are where you want them to be. Then
fill hole between two platforms using a
circular plug. Step on the plug to lock it
in place.
16
Check that all post feet are firmly on
the floor. If a post needs lengthening,
turn the rubber foot clockwise until the
post is anchored.
The Community Loft