Location; Load Default Settings; Password - Aethra XC Use And Installation Manual

Location

To access this page follow the route:
H P / S
OME AGE ETTINGS
This section contains regional data about the terminal:
Terminal Name: Enter a name for the terminal
Country Name: Select the country. An international country code will be automatically provided.
Language: Select the desired language.
PBX: Enter the PBX access number for an outgoing call.
Audio Coding: Select the type of audio encoding in "Transmission."
Video Standard: Select the video standard (PAL/NTSC), depending on the peripheral connected
to Video Out.
Selection Tone: Select the desired tone.

Load default settings

To access this page follow the route:
H P / S
OME AGE ETTINGS
From here, the default System configuration can be reloaded. There are two options:
•
"User settings only"
•
"Factory Defaults".
If the "FACTORY SETTINGS" option has been chosen, users will be asked, as a precaution, for
confirmation. An affirmative answer will result in the factory settings being reloaded. All user settings and
data will be lost, including call history, phonebook numbers and static IP addresses.

Password

To access this page follow the route:
H P / S
OME AGE ETTINGS
There are two different kinds of passwords:
Administrator password: Always active. Can be modified by pressing the "EDIT" icon.
User password: Must be activated. Can be modified by pressing the "EDIT" icon.
You can access "Settings" page only.
Note: The Default password value is "1234".
/ A .
DMINISTRATOR
/ A .
DMINISTRATOR
/ A .
DMINISTRATOR
39