H.323 Settings; Sip Settings - Aethra XC Use And Installation Manual

H.323 settings

This section contains the configuration options necessary to use the system with the H.323 protocol:
•
Name H.323: (H.323 ID) the name used by the terminal for registration with the GateKeeper.
•
Number H.323: (E.164) identifying number used by the terminal for registration with the
GateKeeper.
•
Use GateKeeper: Use or not of a GateKeeper.
It is possible to set the following parameters:
Automatic IP Address.
IP Address – insert IP address.
Use H.460.
Advanced:
"Auto Registration" to the GateKeeper, allows the modification of the registration
time limits (Regist. Expiration Time, default: 90 sec);
"Registration Interval Time" (default: 10 sec).
Authentication: with "Enable" the authentication criteria for the server GateKeeper
is activated, for which it is necessary to insert the paramenters requested:
"Mode" – "GateK. ID" – "User Name" – "Password".
NB: to use the GateKeeper it is important that the local terminal is set in the same
time zone as the server GateKeeper.
•
Using NetMeeting: If a T.120 connection is available, a data conference using NetMeeting can
be started by entering the IP address of the application host server. To enable this function:
-
-

SIP settings

This section contains the configuration options for use of the system with the SIP protocol:
•
Terminal "Name"
•
Terminal "Password"
•
"Use registrar": run terminal registration at a SIP Registrar Server.
"Server": Enter SIP Registrar Server IP address.
•
"Use Proxy": use a Sip Proxy Server.
"Server": Enter Sip Proxy Server IP address.
•
"TCP" - "UDP": use the appropriate protocol.
•
"Port": Port for server signaling (Default is 5060).
Check the box next to "Use NetMeeting"
Enter a server IP address where the application is hosted.
38