Terminal Settings - Aethra XC Use And Installation Manual

Terminal Settings

To access this page follow the route:
H P / S
OME AGE ETTINGS
In this section you can configure terminal settings for various network interfaces.
It is possible to set:
•
The maximum data "Rate" for a call.
•
"Audio coding".
•
"Video coding".
Note: With audio and video encoder/decoder settings set to <Auto> the system choose the
encoder/decoder based on the connection bit rate.
Moreover you can explicitly enable/disable some functionalities, in order to have the system being
compatible with old systems.
The functions available are:
•
G.722.1
•
H.264
•
H.263 Annexes
/ A .
DMINISTRATOR
35