Control Panel; Call-Answer Mode; General; Date & Time - Aethra XC Use And Installation Manual

Control panel

To access this page follow the route:
H P / S
OME AGE ETTINGS
On this page it is possible to activate the function Automatic screen saver and to set the timeout.

Call-Answer mode

To access this page follow the route:
H P / S
OME AGE ETTINGS

General

On this page it is possible to configure the following functions:
Mute:
if selected it is active on switching on the system (also see § "Setting the audio").
It can be deactivated during a call and on disconnection is automatically reactivated.
When it is active an icon is visualized on the local and remote terminals.
Do not disturb:
if selected it is active when switching the system on (also se § "PRIVACY functions").
It is not active during outgoing calls and on disconnections it is reactivated automatically.
When it is active an icon is visualized on the local terminal.
Video Privacy:
if selected it is active when switching the system on (also see § "PRIVACY functions").
It can be deactivated during a call and on disconnection will be reactivated automatically.
When it is active an icon is visualized on the local terminal.
Confirm disconnection
Enable/disable confirmation requests for call disconnection.
Automatic answer:
Enable/disable the automatic answer function, after the selected number of rings.
Date & Time
To access this page follow this route:
H P / S
OME AGE ETTINGS
To configure the date and time, move the arrow key to the necessary fields and insert the data using the
alphanumeric keypad.

System Information

To access this page follow this route:
H P / S
OME AGE ETTINGS
This section shows contains information about the software modules installed on the system, including
versions, build dates, etc.
/ U .
SER
/ U .
SER
/ U .
SER
/ U .
SER
33