Draytek Vigor2865 Series Quick Start Manual page 9

The port "WAN2 / P6" is switchable. It can be used for LAN connection or WAN
connection according to the settings configured in WUI.
Switch on Rear Side
Interface
Factory Reset
USB1~2
WAN2 / P6
LAN P1-P5
DSL
PWR
ON/OFF
Description
Restore the default settings. Usage: Turn on the router (ACT
LED is blinking). Press gently and hold for more than 5
seconds. When the ACT LED blinks rapidly, release the
button and the router will restart with its factory default
configuration.
Connector for a USB 3G/4G LTE modem, storage, printer or
USB Thermometer
RJ-45 Gigabit Ethernet connector for WAN modem / router
or
RJ-45 Gigabit Ethernet connector for local network devices
RJ-45 Gigabit Ethernet connectors for local network devices
RJ-11 connector for ADSL or VDSL line
Connector for the power adapter
Power Switch. Turns the unit on or off
3