Indication And Operating Elements; Intended Use - TCS FBO1100-0400 Product Information

Interface for tk systems
Table of Contents

Advertisement

Term
Reset push button
button Reload factory
setting WE
Status indication
TCS:BUS
(red LED)
Status indication
PBX / PSTN connec-
tion (yellow LED)
 The FBO1100 is an interface for the connection from the TCS:BUS to a telephone net in
order to establish a voice connection between a TCS:BUS client (front-door or indoor
stations) and a client within the telephone net.
 The connection is realised via an analogue port.
 Up to 64 FBO1100 can be connected to a TCS:BUS.
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88
FAX: +49 (0) 41 94/ 9 88 129  Mail: hotline@tcsag.de

Indication and operating elements

Function
 for reset, restart the software
 to reload factory settings
 to reload factory settings
 OFF: stand-by
 ON: during a voice connection between TCS:BUS and PBS / PSTN
 both LEDs ON: when reloading the factory setting
 blinks slowly: busy (voice connection or alarming, announcement)
 blinks fast: a-wire is not connected or supplied
 flashes OFF: device is activated for programming with configuration software
configo™
 flashes ON: door call, internal call or sensor signal received
 flashes ON, once, long break: a-, P-wire are exchanged or short-circuited
 flashes ON, twice, long break: error duplication of the block number and
different device versions
 flashes ON, three times, long break: error duplication of the block number
in case of identic devices
 OFF: error P-wire is not connected or not supplied
 ON, briefly: as long as a call signal comes in at the TK-Interface
 ON: after a door call, during connection establishment and voice connection
 both LEDs ON: when reloading to factory settings
 blinks slowly: programming mode active
 blinks fast: once, connection to the PBX / PSTN cannot be realised, occu-
pied
 flashes OFF: after a door call with deviated connection establishment, until
the end of the delay time
 flashes ON: connection to the sensor without speaking
 flashes ON, once, long break: variant with 16 dialing registers
 flashes ON, twice, long break: variant with 4 dialing registers
 flashes ON, three times, long break: variant with 32 or 64 dialing registers

Intended use

6
Subject to technical changes.
PI_FBO1100_uk 1A
04/2013

Advertisement

Table of Contents
loading

Table of Contents