04/2013
Reload to factory settings
All programmed parameter are deleted within one process.
This is necessary, e.g. in case the identification number for the programming mode is lost.
This number can be reset only to 0000 by reloading the factory setting.
Press the button Load factory settings and keep it pressed.
At the same time, shortly press the Reset button.
Release the button Load factory setting. The factory settings are reloaded. The process
takes around 2 s. During this time the actuator output is active.
The call acceptance is realised by pressing the button 7 of the (mobile) telephone (can
be changed with the configuration software configo™, as of version 1.7.)
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88
FAX: +49 (0) 41 94/ 9 88 129 Mail: hotline@tcsag.de
21
Operating
Subject to technical changes.
PI_FBO1100_uk 1A