Set The Block Number (Command 18); Enter User Telephone Numbers And Programming Bell Buttons - TCS FBO1100-0400 Product Information

04/2013

Set the block number (command 18)

 When more than one FBO1100 is connected to a TCS:BUS, first the block numbers of
the second and all further FBO1100 must be changed (delivery state of all FBO1100:
block number 72)
ATTENTION!
If the block number is changed after the assignment of the bell buttons, the
!
FBO1100 does not react when pressing these bell buttons. The bell buttons must
be deleted and programmed with the new serial number.

Enter user telephone numbers and programming bell buttons

 To establish a voice connection from the door to a (mobile) telephone, a telephone
number must be entered in a dialing register and the entered telephone number must
be allocated to a bell button.
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88
FAX: +49 (0) 41 94/ 9 88 129  Mail: hotline@tcsag.de
17
Subject to technical changes.
PI_FBO1100_uk 1A
aQ entry is
stored