Manufacturer And Bar Feeder Identification; Assistance Request; Attachment List - IEMCA BOSS 332 Manual For Use And Maintenance

1 - GENERAL INFORMATION
EN
1.3

MANUFACTURER AND BAR FEEDER IDENTIFICATION

A Manufacturer identification.
B EC mark of conformity.
C Year of manufacture.
D Bar feeder model.
E Serial number.
G Mains frequency.
H Power consumption.
M Supply voltage.
N Bar feeder weight.
P Pneumatic system pressure.
Q Bar feeder and bar pusher length.
R Interrupting power.
S Basic Wiring Diagram Number.
T Interface Wiring Diagram Number.
INFORMATION:
always provide the manufacturer with the above mentioned specifications when
requesting information or ordering spare parts, etc.
1.4

ASSISTANCE REQUEST

Whenever necessary, please apply to one of the centres shown in the "LIST OF THE CUSTOMER
SERVICE CENTRES".
INFORMATION:
when requesting technical assistance for the bar feeder, always specify the data
shown on the identification plate.
1.5

ATTACHMENT LIST

Together with this manual, the customer receives the following documents.
- Keyboard instruction manual; it contains all the operation instructions for the operational
parameter setting.
- Interface wiring diagram.
- Spare parts catalogue, contains the coded drawings of the bar feeder components to use in
case it is necessary to place an order of parts that need to be replaced.
- CD-Rom containing all the above-mentioned documents, inclusive of the Operation and
Maintenance Manual, the Brochure with all the technical requirements of the bar feeder, the
wiring diagram and a list of the service centres.
1 - Pag. 4 / 5
BOSS 332/545/552 HD