Page 1
Amplifier Quick Setup Source Unit Switched 12V to REM Connect to chassis ground of vehicle (NOT Required if using high level inputs. Refer to manual for more information.) *Keep grounds as short as possible. For Motorsport and Boat applications, the ground wire should go directly to the negative battery terminal.
Page 2
Amplifier Clip Indicator Setup Step 1 - Input Input Clip Indicator Setup Step 4 Be sure to disconnect all speakers - Input from the amplifier. Play test tone* or music for setup. Failure to comply may cause damage to connected components and/or amplifier.
Need help?
Do you have a question about the PBR300X1 and is the answer not in the manual?
Questions and answers