Warranty And Limitations Of Liability; Technical Data - Beem SB-012 Manual

EN

Warranty and Limitations of Liability

The warranty does not cover faults caused by incorrect handling, damage or attempted repairs.
The same applies to normal wear and tear.
We do not accept any liability for damage or consequential damage resulting from:
• failure to follow the operating instructions
•
non-designated use
• improper or unsuitable handling
•
repairs which are not carried out properly
• unauthorised modifi cations
• use of outside parts or spare parts
•
use of unsuitable additional parts or accessories
Keep the original packaging during the warranty period of the device so that the device
can be properly packaged up if it needs to be returned. The warranty claim will lapse if any
damage is caused during transport.

Technical Data

Article number:
Model number:
Voltage supply:
Power:
Protection class:
ID of operating instructions: Z 09670 M BE V1 0820 dk
Disposal
Dispose of the packaging material in an environmentally friendly manner so that it can be
recycled.
This device is governed by the European Directive 2012/19/EU on waste electrical and
electronic equipment (WEEE). Do not dispose of this device as normal domestic waste,
but rather in an environmentally friendly manner via an offi cially approved waste disposal
company.
09670
SB-012
220 – 240 V ~ 50 Hz
max. 500 W
II
22
All rights reserved.