Beem SB-012 Manual page 16

EN
Use the milk jug only with the base station provided. Do not use the
•
base station with other devices.
Do not make any modifi cations to the device. Do not replace the
•
connecting cable yourself. If the device or the connecting cable of
the device are damaged, they must be repaired or replaced by the
manufacturer, customer service department or authorised distribu-
tors in order to avoid any hazards.
It is essential to follow the instructions in the "Cleaning and Care"
•
chapter.
DANGER – Danger of Electric Shock
• Use the device only in closed rooms.
• Do not use the device in rooms with high humidity.
• If the base station falls into water, cut the power supply immediately. Do not attempt to pull it
out of the water while it is still connected to the mains power!
• Never touch the device and the connecting cable with wet hands when the device is con-
nected to the mains power.
• Make sure that the steam which emerges is not aimed directly at electrical devices and equip-
ment containing electrical components.
WARNING – Danger of Injury
• Danger of suffocation! Keep children and animals away from the packaging material.
• Danger of strangulation! Make sure that the connecting cable is always kept out of the
reach of small children and animals.
Danger of scalding from heat, hot steam or condensation!
• Avoid coming into contact with the rising steam. Do not open the lid of the milk jug dur-
ing the heating and frothing process.
• Never pour milk into the milk jug with the device switched on.
• Allow the device to cool down before using it again.
• Do not move the device during the heating and frothing process.
16