Playing The Audio From A Video In Dual Mode - Cambridge SoundWorks Oontz Angle 3 Ultra User Manual

Using the OontZ app for Dual Mode
Select the Menu in the upper left hand corner of the app and select 'Dual Mode' from the menu.
Press 'Connect' to connect
two OontZ Angle 3 ULTRA
speakers in Dual Mode.
Disconnecting and Reconnecting the OontZ Angle 3 ULTRA speakers.
– Press 'Disconnect' to disconnect the two OontZ Angle 3 ULTRA connected speakers from each other.
– The light above the Play/Pause Button on both speakers will turn off and the speakers will be disconnected from each other.
– To reconnect press 'Connect' with both OontZ Angle 3 ULTRA speakers turned on.

Playing the audio from a video in Dual Mode

– To play the audio from a video or TV in Dual Speaker Mode you will need to connect the Master Speaker to your device or TV using a
the 3.5mm Stereo Audio Cable, allowing the audio and video to play in sync with each other. If the Master Speaker is connected over
Bluetooth to your device or TV there will be a delay in the audio playback from a video.
After a few seconds the light above the Play/Pause Button
second speaker will be lit solid White. The Master Speaker will say "Left
Channel" and the second speaker will say "Right Channel". The speakers
are connected together for Left Channel - Right Channel and you are
ready to play.
Play Control Speaker
Light lit solid Blue or Green
Light lit solid White
on the
Second Speaker
Light OFF
Light lit solid White
Page 27