Indicators And Controls - Manson Engineering Industrial SBC-5936 Operation Manual

Fig. 1: correct installation direction

Indicators and Controls

Fig. 2: 7 LEDs indicators and one SET button
SET button
The SET button is for selection of battery & deactivate Ignition Control Mode.
5 second long press for battery selection.
15 second long press to deactivate Ignition Control Mode.
Charging Status LED for LEAD ACID Battery – 3 Stages
Charging status LED
Fast flashes
Slow flashes
Solid
Charging Status LED for Lithium Fe PO4 Battery – 2 Stages
Charging status LED
Fast flashes
Slow flashes
Output Voltage LED
This LED shows the voltage level at the V OUT terminal, it is the battery voltage when there is no Load
connected to the battery.
LED status
Fast Flashes
Slow Flashes
Solid
Battery Voltage Level
Battery Voltage level is low
Battery Voltage level is medium
Battery Voltage level is high
Charging stage
Bulk charge
Absorption
Float
Charging stage
Bulk charge
Absorption
P.6