Installing Updates For The Home Connect Software; Resetting Home Connect Settings; Data Protection - Siemens GI81NH Series User Manual

en Home Connect
10.4 Installing updates for the
Home Connect software
The appliance searches for updates
to the Home Connect software at reg-
ular intervals.
Note: If updates are available, the
temperature display shows
To reset the update and the temper-
ature display to the set temperature,
press any touch field.
Press .
1.
a The temperature display shows
Press repeatedly until the tem-
2.
perature display shows
Press .
3.
a The temperature display shows an
animation.
a The update is installed.
a The control panel is locked during
the installation.
a If the installation is successful, the
temperature display shows
If the temperature display shows
4.
, the appliance was unable to in-
stall the update.
Repeat the process at a later
‒
point.
If the update cannot be completed
5.
after several attempts, contact cus-
tomer service → Page 25 .
10.5 Resetting Home Connect
settings
If your appliance experiences con-
nection problems with the WLAN
home network (Wi-Fi) or your appli-
ance wants to log into a different
WLAN home network (Wi-Fi), you can
reset the Home Connect settings.
Press .
1.
a The temperature display shows
Press repeatedly until the tem-
2.
perature display shows
18
3.
a The temperature display shows an
a The temperature display then
a The Home Connect settings have
.
10.6 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
.
connected to the Internet, your
appliance will transmit the following
.
types of data to the Home Connect
server (initial registration):
¡ Unique appliance identification
¡ Security certificate of the Wi-Fi
.
¡ The current software and hardware
¡ Status of any previous reset to
This initial registration prepares the
Home Connect functions for use and
is only required when you want to
use the Home Connect functions for
the first time.
Note: Please note that the
Home Connect functions can only be
utilised with the Home Connect app.
Information on data protection can be
retrieved in the Home Connect app.
.
.
Press .
animation for 15 seconds.
shows .
been reset.
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
communication module (to ensure
a secure data connection).
version of your appliance.
factory settings.