Table of Contents
Advertisement
Please also follow the instructions
¡
in the Home Connect app.
Notes
Please note the safety precautions
¡
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the Home Connect app.
→ "Safety", Page 4
Operating the appliance on the ap-
¡
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
Home Connect app.
10.1 Setting up the
Home Connect app
Install the Home Connect app on
1.
your mobile device.
1
Start the Home Connect app and
2.
set up access for Home Connect.
The Home Connect app guides
you through the entire login pro-
cess.
10.2 Setting up Home Con-
nect
Requirements
The Home Connect app has been
¡
installed on your mobile device.
The appliance is receiving signals
¡
from the WLAN home network (Wi-
Fi) at its installation location.
1
Apple App Store und the Apple App Store logo are trademarks of Apple Inc.
Google Play and the Google Play logo are trademarks of Google LLC.
Open the Home Connect app and
1.
scan the following QR code.
Follow the instructions in the
2.
Home Connect app.
10.3 Resetting Home Connect
settings
If your appliance experiences con-
nection problems with the WLAN
home network (Wi-Fi) or your appli-
ance wants to log into a different
WLAN home network (Wi-Fi), you can
reset the Home Connect settings.
Press and hold
▶
until
goes out.
The Home Connect settings have
a
been reset.
10.4 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
Unique appliance identification
¡
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
Security certificate of the Wi-Fi
¡
communication module (to ensure
a secure data connection).
The current software and hardware
¡
version of your appliance.
Status of any previous reset to
¡
factory settings.
Home Connect en
for six seconds
17
Advertisement
Table of Contents
