Advertisement
•
The foam produced by the generator is not compact as it appears in your video.
After verifying that your water source is correct, the problem most probably will be with the
concentration of foam fl uid that you are using. When using our High concentrate foam fl uid,
you should dilute the fl uid at 25% with water and this dissolution will be then absorbed by
the machine and mixed with more water from your water source. If you are working with
a water tank + pump, then you should prepare the foam mixture PREMIX by mixing at
a rate of 2%. If you're using a diff erent foam fl uid you probably will need to increase the
concentration.
•
What length of water hose can I use to feed the foam generator?
Again, this will depend on the water pressure and outfl ow which you have on your place.
Thus, it will depend on the performance of the pump you are using. If you use the
Sirocco machine equipped with its snow head turns into an excellent machine for artifi cial
snow generating snowfl akes with specifi c snow fl uid, and covering a large area. Very realistic
eff ect.
SHOOTING RANGE: 15 mts
CONSUMPTION OF SNOW FLUID: 15-20 l/h on average (24 l/h at 100% of power). This
data refers to Ready to Use snow fl uid (not concentrate).
TECHNICAL SPECIFICATIONS
REF: SIR-FOAM/M
DIMENSIONS: 94,5 x 69 x 68,5 cm
WEIGHT: 45,85 kg
VOLTAGE IN: 220AC 50 HZ - 110AC 60HZ
POWER: 1.1 KW
SPEED: 3000 RPM
SIROCCO SNOW
13
INSTRUCTION MANUAL
Advertisement
