Advertisement
3.3
Display
To show information on the display, the thickness gauge uses 4 main digits and
some additional indicators, the functions of which are described below.
When the gauge is displaying thickness measurements, the display will hold the
last value measured, until a new measurement is made.
Besides, when the battery charge is low, "
left corner of the display. If this happens, it is necessary to replace (or recharge)
the battery.
Fig. 2 – Outer appearance of display
This indicator shows the stability of thickness measurement (16
vertical bars). If the measurement is stable, more than a half of
such vertical bars should be displayed.
When the "in" symbol is on, all thickness measurements are
made in inches. The maximum thickness that can be displayed is
19.999 inches.
When the "mm" symbol is on, all thickness measurements are
made in millimeters. The maximum thickness (for steel) that
can be displayed is 600 mm.
When the "in/us" symbol is on, the velocity of ultrasonic waves
is measured in inches-per-microsecond.
icon starts flashing in the upper
"
8
Advertisement
