Advertisement
"V" indicator appears during the calibration at a known
ultrasound velocity in a test object. For details, please refer to
para 6.7 of this Manual.
"Prb0" symbol is on, after the zero calibration has been finished.
For details, please refer to para 6.6 of this Manual.
"Auto" symbol indicates that automatic display backlight mode is
switched ON. For details, please refer to para 6.5 of this Manual.
"On" symbol indicates that permanent display backlight mode is
switched ON. For details, please refer to para 6.5 of this Manual.
"Off" symbol indicates that display backlight mode is switched
OFF. For details, please refer to para 6.5 of this Manual.
"1-OK" symbol indicates the two point calibration, namely
calibration of the 1
point. For details, please refer to para 6.9 of
st
this Manual.
"2-OK" symbol indicates the two point calibration, namely
calibration of the 2
point. For details, please refer to para 6.9 of
nd
this Manual.
Battery charge indicator.
10
Advertisement
