Cabinet Wall Installation - Lanberg WF01 64 V2 Series User Manual

3. Cabinet wall installation

1. Prepare (your own) 4 mounting anchors and 4 screws to
match the load capacity of the cabinet's overall weight and
the diameter to the holes of the wall-mount rail: 4 - Ø 10. The
distance between the centers of the larger holes on the rail,
per side, is 69 mm, and between the centers of the larger
holes, at the ends of the rail, (left and right) is 468 mm.
2. Align the wall-mount rail [H] with the surface of the wall and
make sure it is leveled.
3. Outline the 4 edges of the wall-mount rail holes (excluding
those on the hooks).
4. Drill 4 holes in the outlined spots, then insert the
expansion anchors.
5. Re-adjust the rail so that between its 2 L-shaped hooks and
the wall there is enough space for attaching the cabinet.
6. Screw 4 bolts into the expansion anchors. First into 2 external
holes (1 on each side), others into 2 internal holes.
7. Hang the assembled cabinet by attaching 2 holes at the back on top of the top cover [D] by 2 rail hooks.
8. Use 2 M4*8 self-tapping Phillips screws [I] to fix the rear structure of the cabinet with 2 hooks on the wall-mount rail.
EN Lanberg © 2015-2021
21