General Safety Precautions; Guidelines For Esd Security Principles; Transport; Warranty - Lanberg WF01 64 V2 Series User Manual

1.4 General safety precautions

• The device specifications must be strictly observed when using the product and connecting it to any external products. The
specifications of the external devices to which this device is to be connected must also be observed.
• The product cannot be used outside of the rated values in its specification. The warranty does not cover any damage caused by
a deviation from these values when using the device.
• All installations, connections, cabling, and circuits in which the product will be used must be made in a manner consistent with locally
applicable electricity regulations and in such a way as to eliminate the risk of people walking or tripping over them. Use only power
cables with VDE and CE certification when connecting them to the device. It is necessary to use the same procedures mentioned in
this section when connecting the cabling to the product or to the external components.
• For external devices connected to this product, the operating instructions supplied by their manufacturer must be strictly observed.
• To ensure safety and compliance of the device, use only components or parts that meet the specifications or are recommended by the
manufacturer.
• During the warranty period, it is forbidden to replace any elements of the product by its users. Maintenance should be entrusted only
to qualified technical personnel, such as the manufacturer's technical department or an authorized importer.
• If it is necessary to perform maintenance of the device, it should be carried out or supervised by a person having appropriate
qualifications and technical knowledge about the device, while maintaining proper precautions. All this under the local regulations in
force.
• If it is necessary to perform maintenance of the equipment or similar activities that will require opening the device or contact with
elements that may be under potential voltage, the following safety rules should be observed before carrying out these activities:
remove all bracelets, necklaces, rings, watches or other metal hand and neck objects and use tools with insulated handles.
• Always before performing the equipment maintenance, there should be a person nearby who would react and take appropriate steps
to assist the person in charge of the device maintenance in the event of an accident. A person undertaking the maintenance should
always wash hands after finishing his / her work.
• NEVER allow a situation where sparks or flames could occur near the device. The aftermath of such a situation could have very negative
consequences for people and things in the vicinity.
• In the event of a fire, immediately and (without unnecessary delay) disconnect the power supply and notify the fire department of the
situation by dialing their assigned emergency number in the country of your stay.
• The product is intended for indoor use. Do not rebuild and/or modify the products and/or their components.
• Under no circumstances, other external products are to be introduced (connected to the device), that are non-compliant with the
intended use of that device and/or not intended for that purpose.
• The manufacturer and distributor are not responsible for any damages resulting from improper use and improper handling of the
product (not in accordance with this manual).
• Before attempting to attach or disconnect a device, connect or disconnect cables to it in a 19" wall-mount cabinet, please firstly
connect all components to a verified and efficient grounding.
• Make sure that all parts assembled from the beginning in 19" wall-mount cabinet, as well as equipment assembled by the user, are
properly screwed or unscrewed when disassembly is carried out. It is unacceptable that any elements of the product or constituting
its coherence are not correctly fastened/applied or pose a threat by their incorrect isolation from other functioning factors that in
contact would cause danger.

1.5 Guidelines for ESD security principles

To prevent damage to the product, system, or electrical components by electrostatic discharge (ESD), it is vital to be properly prepared
and to handle device(s) with care. The following measures are generally sufficient to protect the product against ESD:
• Do not use metal straps or wristbands on your hands to prevent static discharge.
• Touch a grounded metal object first before using/performing the maintenance (if possible) of the device.
• When handling electrical equipment, avoid contact with pins, connectors, and any energy relays.
• When moving electronic components, it is recommended to grab only their (isolated) edges, where there is no current flow. Do not
touch components, integrated circuits, memory modules, contacts, etc.
• All electronic devices should be placed back into antistatic bags (if possible) when they are not in use.

1.6 Transport

During transport, store the product only in the original packaging to protect against shocks and bumps. Do not throw the packaging in
the trash. When shipping a product under warranty, the product must be in its original shipping box.

1.7 Warranty

The warranty does not apply in the event of product failures and defects resulting from improper use and handling of the device
(not under this user manual). Mechanical damage is the basis for rejecting a complaint. To correctly submit a warranty claim, contact
your retailer.

1.8 Unpacking and examination

In the presence of the carrier, carefully unpack the product from the shipping box and make sure to check whether:
• Contents of the package include all the elements listed in point 1.3.
• All items are undamaged.
In case of absence, damage, discrepancies in the elements contained in point 1.3, a damage report has to be drawn up (if any occurred),
and the matter has to be submitted to the seller. The following are required: photographs, batch number, and description of the problem.
Indicated actions should be carried out on the same day as the date of product delivery.
14
Lanberg © 2015-2021 EN