Operational Overview - Intrepid Control Systems neoOBD2-SIM User Manual

neoOBD2-SIM User's Guide
Figure 1: neoOBD2-SIM Package Contents
If anything is missing or damaged, please contact Intrepid Control Systems for assistance. The
contact for your locale can be found at https://www.intrepidcs.com/worldwide.

1.3 Operational Overview

The device can be powered using the built-in 2000 mAh Lithium Ion battery, the 12V power
supply, or the USB Type-C cable. The battery is charged when the power supply or USB
cable are connected and the power switch is turned on. The power switch must be turned on
to charge the battery.
Connecting to the Device
To connect to the device, take the USB cable, connect it to a PC, and open Vehicle Spy. Vehicle
Spy can be installed from the CD that was provided with the device. If no CD is available, or
a digital copy is needed, please contact Intrepid Control Systems for a replacement.
You may want to review the software install before the connection. If there isn't software, no
driver for the device will be available.
Once the device is connected, navigate to Setup > Hardware to open neoVI Explorer. The
device information should auto populate. Highlight the neoOBD2-SIM and press Connect.
Version 1.0 - March 11, 2019 2 © 2019 Intrepid Control Systems, Inc.