Moto E5 Play
Level 2 – Service and Repair Manual
Rear Housing Removal
NOTE
The Rear Housing can be recovered
and reused after removal.
1.
Use the Torque Driver and the T5 Torx Bit to
remove the 10 T5 Torx Machine Screws from
the Rear Housing.
NOTE
After you remove the Machine Screws,
you cannot reuse them.
2.
Insert the Thin Plastic Spudger between the
Rear Housing and Front Housing and
disengage the side snap.
3.
Continue to disengage the snaps around the
edges of the Rear Housing.
PAGE 17
Lenovo Confidential Restricted:
Do not share without consent from Lenovo