Table of Contents
Advertisement
SlimSCSI 1480 User's Guide
General Software Troubleshooting
Some portable PCs have a Suspend/Resume button to save power
without turning off the PC. If your PC hangs (that is, freezes, or
stops responding to keystroke commands) after you use this button
to resume activity, it may indicate that you need to update the
pccard.vxd and cbss.vxd files. Follow these steps to update these
files and eliminate the hang problem:
1
In Windows 95, click the Start button, then click Run.
2
In the Run window, type command, then click OK.
3
At the DOS prompt, type cd \windows\system and press
Enter. If Windows 95 is installed in a different directory, type
that directory name instead.
4
Type: copy pccard.vxd pccard.sav and press Enter. Then type
copy cbss.vxd cbss.sav and press Enter.
The old pccard.vxd and cbss.vxd files are now saved under a
different name, in case you need to recover them later.
5
Type exit and press Enter to close the MS-DOS Prompt.
6
Insert the SlimSCSI 1480 Setup diskette in the floppy disk
drive.
7
Click the Start button, then click Run.
8
In the Run window, type a:\cardbupd and click OK. The files
are updated automatically.
Note:
The update program assumes that your
Windows 95 program files are in the C:\Windows
directory. If Windows 95 is installed in a different
directory, you must enter the correct location by
typing
a:\update <current path to your Windows 95 files>
For example: a:\update c:\Win95
9
Click the Start button, click Shut Down, select Restart the
Computer, and click Yes.
14
Advertisement
Table of Contents
Troubleshooting
