USA Lab UHC Series Manual page 2

1. Safety Instructions and Features
1.1 Safety Instructions
1.2 Features
1.3 Technical parameters
2. Diagrams
3. Control panel operation
4. Preparing for installation
5. Instructions for installation
6. Notes
6.1 Purpose
6.2 Storage
7. Maintenance
8. After-sales service
1 Safety Instructions and Features
1.1 Safety Instructions
ONLY USE SILICONE OIL IN THE TANK.
The use of Personal Protection Equipment (PPE) is REQUIRED.
Follow all federal, state and municipal laws, codes and ordinances
Please make sure the power connection is correct and well-grounded. (see the technical parameters for
details)
Fluid lines should be unobstructed without any hard bends in the run. Install gasket inside fittings before
use.
Apply a rag to wipe the parts clean after washing away stains; do not use hard objects.
Do not use flammable, corrosive or explosive substances on, in, or near the equipment.
Do not run the liquid pump dry.
The compressor requires 15 minutes to rest before operating after being shutdown. Do not allow the
compressor to cycle more than 5 times per day.
If there is a problem, do not continue to use the chiller. Contact us immediately.
Index
.
1