Related Manuals for Fisher-Price Silly Willy Bubblin' Sprinkler
Summary of Contents for Fisher-Price Silly Willy Bubblin' Sprinkler
- Page 1 ® Instructions Model Number 72961 ™ Please save these instructions for future reference. Adult assembly is required. No tools are needed for assembly. Bubble solution needed (included) for bubblin' fun.
- Page 2 Tail Upper Tabs Upper Tabs Curve Toward Tail • Locate the left and right fins (marked L and R on the inside). • Position the right fin so that it curves toward the tail of the toy. • At an angle, fit the upper tabs on the right fin into the slots in the right side of the sprinkler.
- Page 3 Bubble Solution Air Hole • Cover the air hole (within the “blow hole”) with your finger. • Pour about two ounces ( cup) of bubble solution into the “blow hole”. For refills, use commercial bubble solution. CAUTION Water inside your sprinkler or garden hose, if left for an extended period of time outside in direct sunlight, can become very hot and can harm your child.
- Page 4 Garden Hose Connector Ring IMPORTANT! Before attaching a garden hose (not included) to the sprinkler, turn water on at the spigot for 30 seconds to clear debris from the garden hose. Turn water off. • Insert the end of your garden hose into the connector ring at the base of the sprinkler.
- Page 5 • Slowly turn water on at the spigot until the sprinkler turns, water sprays and bubbles form. • If the sprinker does not make bubbles: - Check to be sure there is enough bubble solution in the sprinkler. - Flush the bubble chamber of the sprinkler by running clean water, from your garden hose, into the “blow hole”...
- Page 6 Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 1-800-800-812 (valid only in Australia). Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. ©1999 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.