Summary of Contents for Fisher-Price Shake'nGO Xtreme Speedway
Page 1
Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Requires four “D” (LR20) alkaline batteries (not included) for the charger. Tool required for battery installation: Phillips screwdriver (not included). www.fisher-price.com...
Assembled Parts Battery Installation 1.5V x 4 "D" (LR20) Crossover Track Flag – 4 Wavy Track • Locate the battery compartment door on the bottom of the car charger. • Loosen the screws in the battery compartment door and remove the door. •...
Page 4
Assembly Upper Loop Support Billboard • Place the labels exactly as shown on both of the upper loop supports and the billboard. For best results, avoid repositioning a label once it has been applied. • Place the loop assemblies next to each other as shown. Slide the loop assemblies together.
Page 5
Extreme Speed. Extreme Action. Extreme Fun! Hexagonal Sockets • Snap" the track pieces together. " • Fit any of the flags, the billboard or the ramp to any of the hexagonal sockets on the track pieces. Charger Indicator Lights Hint: For some assemblies, you can hook the upper portion of the track together, side by side.
Page 6
Shake It, Then Race It! • Slide the power switch on the bottom of each vehicle ON • Put the ramps on the track and watch the cars “jump” the track! • Lift the car and shake it to start the "engine" and the sound effects. •...
Page 7
Easy Track Changeup! Try these fun track layouts! For more detailed information, visit us on-line at www.fi sher-price.com and click on the Shake 'n Go button Then click on XTREME SPEEDWAY.
Page 8
Easy Track Changeup! Try these fun track layouts! For more detailed information, visit us on-line at www.fi sher-price.com and click on the Shake 'n Go button Then click on XTREME SPEEDWAY.