Advertisement
3 3
3 3
• Slowly turn water on at the spigot until the sprinkler turns, water
sprays and bubbles form.
• If the sprinker does not make bubbles:
- Check to be sure there is enough bubble solution in
the sprinkler.
- Flush the bubble chamber of the sprinkler by running
clean water, from your garden hose, into the "blow hole"
for about one - two minutes. Refill the sprinkler with fresh
bubble solution.
Note: We do not recommend the use of silicones or oily lubricants
on this toy. As with any bubble producing toy, when even a very
small amount of silicone or oily lubricants are put into or used near
the bubble chamber (inside the "blow hole"), bubbles will not form.
Hint: Turn the water off at the spigot when the sprinkler is
not in use.
4 4
4 4
Advertisement
